Canon Printer Code Error and Messages

If your printer stops working, it usually shows a Canon printer error. These codes tell you exactly what is wrong. At All Printer Setup, we provide online support to help you get back to printing quickly. Here are the most common Canon printer error codes and how you can fix them yourself.

Error Code E05: Ink Cartridge Issues

This Canon printer code means your machine does not recognize the ink cartridge. It might be dirty or not clicked into place correctly.

How to fix it:

• Turn off the printer.
• Open the cover and take out the ink cartridges.
• Use a dry cloth to gently wipe the gold contacts on the cartridge.
• Snap the cartridges back into their slots.
• Turn the printer on and try a test print.

Error Code E13: Low Ink Level

This Canon printer fault codes message appears when your ink is almost gone. Your printer will stop printing to prevent damage to the print head.

How to fix it:

• Check your ink levels on the printer screen or computer.
• Buy a new set of ink cartridges.
• Replace the empty cartridge with a full one.
• If you just refilled a cartridge, you may need to hold down the "Stop" or "Reset" button for five seconds to skip the warning.

Error Code 853: Print Job Error

This code usually means there is a communication problem between your computer and the printer. A stuck print job in the queue is the most likely cause.

How to fix it:

• Open your computer's "Settings."
• Go to "Devices" and then "Printers & Scanners."
• Select your Canon printer and click "Open Queue."
• Cancel all waiting documents.
• Restart both your computer and your printer.

Error Code 335: Connection Problems

This error points to an electronic glitch or a loose cord. It means the printer parts cannot "talk" to each other.

How to fix it:

• Make sure the power cord is pushed all the way into the wall and the printer.
• If you use a USB cable, unplug it and plug it back in.
• Update your printer drivers. Visit the official Canon support site, type in your model number, and download the newest software.
• If the code stays, turn off the machine, remove the ink and the print head, wait a minute, and put them back in.

Error Code 343: Full Ink Pad

Inside your printer, a small sponge called an ink pad catches extra ink. When it gets too full, the printer will stop to avoid a messy leak.

How to fix it:

• Open the printer to find the ink cartridge area.
• Look for a black frame that holds the absorbing pads.
• Carefully pull out the frame and the pads.
• Wash the pads in a bowl of warm water. Squeeze them until the water runs clear.
• Let the pads dry completely on a paper towel.
• Put the dry pads back into the printer.

Need Professional Help?

If you fail to fix these errors on your own, you should contact All Printer Setup. We solve all types of printer errors online all over the USA. Whether you are stuck with confusing Canon printer error codes or the screen keeps showing Canon printer fault codes, our team can help.

Don't let a Canon printer code ruin your day. We offer quick online solutions to get your machine running perfectly again. Reach out to us for professional help anytime!