Brother Printer Paper Jam

A brother printer paper jam happens when sheets of paper get stuck inside the machine and stop your print job. This common problem can stop your work and leave you feeling stuck. You might see a brother mfc printer paper jam error on your screen even if you cannot see the paper right away. Sometimes, a brother printer paper jam but no paper message pops up because a small scrap of paper or a dirty sensor is fooling the machine. Whether you use an inkjet or a brother laser printer paper jam occurs in your office, these errors are usually easy to fix with a few simple steps.

Common Reasons for Paper Jams

Many things can cause a brother mfc paper jam problem during a busy day. If your brother printer always paper jam errors occur, check these common causes:

• Wrong Paper Size: Using paper that is too thick or the wrong size for your tray settings can cause a brother printer jam.
• Overfilled Trays: If you put too many sheets in the tray, the rollers cannot grab them correctly.
• Dirty Rollers: Dust and ink buildup on the rubber rollers make them lose their grip, which leads to a brother paper jam.
• Damaged Paper: Wrinkled, damp, or curled sheets often get stuck in the paper path.
• Debris in the Drum: A brother printer paper jam in drum happens when a piece of paper tears and stays inside the drum unit.

Easy Brother Printer Paper Jam Fix

Clear the path and get back to work by following these steps. The team at All Printer Setup recommends you handle the machine gently so you do not break any internal parts.

1. Turn Off Power: Unplug the printer from the wall outlet to stay safe.
2. Check the Tray: Pull out the paper tray and take out any loose or wrinkled sheets.
3. Open the Covers: Open the front and back doors to see the entire paper path.
4. Remove the Paper: Use both hands to pull the jammed paper out slowly. If you pull with only one hand, you might tear the sheet and leave scraps behind.
5. Clean the Rollers: Wipe dust off the rollers with a soft, lint-free cloth so they grip the paper better.
6. Clear the Drum: If you own a laser model, lift out the drum unit to check for a mfc paper jam.
7. Reset the Machine: Close every door, plug the power cord back in, and turn the printer on.

Tips to Prevent Future Jams

You can avoid a paper jam in the future by taking care of your device. Always fan your paper before putting it in the tray to make sure the sheets are not sticking together. Only use paper that meets the specs for your specific model. Keeping your software up to date also helps the machine talk to your computer correctly, which prevents many errors.

If you still have a brother mfc paper jam that you cannot clear, the team at All Printer Setup is here to provide online support and help you find a solution.