123 HP OJPro 6970 Fax Setup

123.hp.com/ojpro6970

  • 123 HP OJPRO 6970 Fax
  • 123 hp ojpro printer setup
  • 123 HP Wireless Setup
  • 123.hp.com/ojpro6970
  • 123 HP OJPro All in One Printer
  • 123 HP Officejet Pro Wireless Setup
  • HP OJPro  Driver Install
  • 123.hp.com/setup6970

123-hp-com-123-hp-ojpro-6970

call button

123 HP OJPro 6970 –  FAX TO MULTIPLE RECIPIENTS


How to send a fax to multiple recipients using group speed dial?

  • Place the original document print side up on the automatic document feeder or print side down on the scanner glass.
  • Tap on Fax setup from the printer’s control panel display.
  • Touch Speed Dial option.
  • From the list of options available, click on Setup.
  • On the Printer Fax Setup menu do the following,
  • Choose Group Speed dial and follow the on screen instructions. Create a recipient group with your contacts.
  • Go to the Select Speed Dial screen, to select the recipient group you have created.
  • Choose Start Fax.

SEND A FAX IN ERROR CORRECTION MODE

If you enable error correction mode, it will prevent loss of data because of poor phone lines or errors that occur due to a problem in transmission line.

How to change the ECM setting from the Printer Setup control panel?

  • Slide your fingers across the printer setup control panel screen and then choose Setup.
  • Tap on Fax Setup.
  • Click Advanced Fax Setup.
  • From the list of options available, tap on Error Correction Mode to switch it on or off.
  • Choose between On or Off.

RECEIVE A FAX MANUALLY

When you are connected over phone, the person on the other end can send you a fax when you still in conversation with that person. This process is called manual faxing.

How to receive a fax manually?

  • Switch on the printer Setup and place the stack of paper in the main tray.
  • Make sure you remove the original documents placed on the document feeder tray.
  • Now, user should set the Rings to Answer setting to a high number. This will enable the user to attend the incoming call before the printer Setup answers by itself.
  • If you do not want the printer Setup to answer by itself, switch off the Auto Answer setting.
  • When you are on call with the sender, ask him/her to press Start on the fax machine.
  • Do the following when you start hearing fax tones.
  • Tap on Fax from the printer setup  control panel and the choose Black or Color.
  • Once, the printer setup starts receiving the fax, you can either hang up or remain on line. (NOTE: The phone line is select while you receive the fax.)
  • 123.hp.com/ojpro6970

123 HP OJPro 6970 – CHANGE FAX SETTINGS


How to set or change the fax header?

  • To change or set the Fax Header do the following,
  • On your printer’s control panel display, slide your fingers across the screen to access options.
  • Select Setup and then Fax Setup.
  • Choose Basic Fax Setup.
  • On the Fax Setup find the fax header option.
  • Tap on Fax Header.
  • Specify your personal /company name and then click Done.
  • Mention the fax number and then choose Done.
  • Make sure you type the correct recipient number.

How to set the answer mode?

  • To Set the Automatic answer mode do the following.
  • On your printer’s control panel display, slide your fingers across the screen to access options.
  • Select Setup and then Fax Setup.
  • On the Fax Setup  look out for the Basic Fax setup option.
  • Choose Basic Fax Setup.
  • Tap on Auto Answer to switch it on or off.
  • This will be helpful in case of your absence.

How to set the number of rings before answering?

  • On your printer’s control panel display, slide your fingers across the screen to access options.
  • Select Setup and then Fax Setup.
  • Choose Basic Fax Setup.
  • Tap on Rings to Answer.
  • Specify the number of ring.
  • Select Done to accept the setting.

How to change the answer ring pattern for distinctive ring?

  • Ensure that your HP printer s set to answer fax calls automatically.
  • On your printer’s control panel display, slide your fingers across the screen to access options.
  • Select Setup and then Fax Setup.
  • Choose Advanced Fax Setup.
  • Click Distinctive Ring.
  • A message box will appear stating that the setting should not be changed unless you have multiple numbers. Select Yes.
  • Perform one of the following:
  • Select Ring Pattern Detection and then follow on screen prompts.
  • Choose the ring pattern assigned by your company.

OJPro 6970 – SOLVING FAX PROBLEMS


When the display always shows Phone Off Hook

  • Ensure that you use 2-wire phone cord which came with the printer that is used to connect it to the phone line. If the phone wire is not long enough, get an extension cord to connect it. The extension cord will be available at a nearby electronic store.
  • Also, make sure that any other equipment that uses the same phone line is not in use. If the equipment is in use, then you won’t be able to fax any documents.

When the printer is having problems sending and receiving faxes

  • Switch on your printer setup. Check the display screen. If the Power button is not switched on, then the printer setup is switched off.
  • Ensure that a power cord is connected to the printer setup and plugged into an working wall socket. Now, switch on your printer by pressing the Power button.
  • If you want to send or receive faxes, wait for 5 minutes till your HP Officejet Pro printer setup gets ready.
  • Make sure that HP Digital Fax setup is not enabled. If it is not, then you may not be able to send or receive faxes if the memory is full.
  • Use the phone cord that came along with the printer. Connect one end of the cord to a port labeled as 1-LINE and connect the other end of the cord to the back of the printer.
  • If the phone cord that came with the printer setup is not long enough, the get a 1-wire phone cord from a nearby store to extend its length.
  • After connecting the printer setup and the phone cord, check for a dial tone. If you cannot hear a dial tone, then you will have to call your telephone service provider to get it fixed.
  • Make sure the other equipment that uses the same phone line is not in use. If it is, then you may not be able to use the printer setup.
  • Also, check if any other process has caused an error that is not letting you to do the job. Check the printer to see if it throws any error message. Follow the instructions to solve the problem and then carry on with the fax job.
  • Your phone line connection should not be noise. Those phone lines which have a poor connection may cause problems while faxing. If you hear a noise in the phone connection, then switch off the Error Correction Mode and then try faxing again.
  • Ensure that the DSL filter is properly connected to your printer setup, otherwise you won’t be able to fax successfully.
  • The printer setup you are connected to the wall socket that is not meant for digital phones. Listen to the dial tone to check if your phone is dialog or analog.
  • Do not use a phone splitter which may cause problems while sending and receiving faxes.

When the printer cannot receive faxes, but can send faxes

  • Make sure that you are not using distinctive ring service and set the Distinctive Ring is set to All Rings.
  • If you have set the Auto Answer setting to Off, then you need to receive the fax manually. You cannot receive the fax automatically.
  • If you have a voice mail setup, then you will have to receive the faxes manually and not automatically. In other words, a person must be there next to the printer machine to receive faxes.
  • The software that came with the computer dial up modem will not receive faxes automatically. Modems that are designed to receive the faxes automatically will answer the fax request over the phone line, will prevent the printer from receiving fax calls.
  • There is a possibility that your answering machine might not be properly setup with the computer.
  • The outgoing message may be log or loud enough to detect incoming fax tones.
  • Also, make sure that any other equipment that uses the same phone line is not in use. If the equipment is in use, then you won’t be able to fax any documents.
  • The problem with most fax machine is that they do not have quiet time to detect the fax tones.
  • Try connecting the answering machine directly to the printer when you use an answering machine on the same phone line.
  • If you are encountering problems while receiving faxes, then disconnect the answering machine and try receiving the fax.
  • Now, reconnect the answering machine and record the outgoing message once again. The message needs to be of 10 seconds in duration. Your message needs to be slow and at a low volume.
  • Set the Distinctive Ring pattern to All Rings.

When the printer setup cannot send faxes, but can receive them

  • Insert pauses in a number sequences so that your HP Officejet printer setup does not dial too fast or soon enough.
  • If you are not able to enter pauses, use the monitor to dial the faxes. This will help you listen to the phone line as you type the numbers.
  • If the recipient’s number is not entered in a proper format or if the receiving fax machine is having problems, then call a fax number from your telephone and listen for the fax tones. If you don’t hear a dial tone, then the receiver’s fax machine may not be switched on or connected.

SOLVE HP ePRINT SETUP AND HP PRINTABLES PROBLEMS

Perform the following tasks if you are encountering problems while using Web Services such as HP ePrint and print apps.

  • The printer setup you use must be connected to the Internet using a wireless or an Ethernet connection.
  • The Web Services option on your printer setup should be enabled.
  • The network hub, router or the switch should be switched on and connected properly.
  • Use a working Internet connection if you are using a wireless setup.
  • If you are using an Ethernet connection, connect using a phone cord or a crossover cable to connect your printer setup to the network and that the Ethernet cable is connected properly to the printer setup.
  • While using HP ePrint, enter the printer’s email address properly.
  • Do not enter multiple email address in the To field.
  • The sending document must meet the requirement of HP.
  • If you are entering proxy settings, make sure you enter valid ID.
call button

DISCLAIMER :

All the information in this site is published in good faith and for general information purpose only. We do not make any warranty about the reliability and accuracy of this information. We provide help and support to those who need advice in taking their own websites to the next level.User are requested to go through our policies for website usage. 123.hp.com or 123.hp.com/setup

Summary
Author Rating
1star1star1star1star1star
Aggregate Rating
5 based on 20 votes
Brand Name
123 HP
Product Name
Officejet Pro 6970
Price
USD 199
Product Availability
Available in Stock